MADRIX NEBULA

Interface Art-Net et USB pour le contrôle des pixels des bandes LED et ruban LED-MainBild

Interface Art-Net et USB pour le contrôle des pixels des bandes LED et ruban LED-Bild-1

MADRIX NEBULA

Le stock suffit pour env. 9 semaines.

Prixsur demande

Trouver un revendeur

Le stock suffit pour env. 9 semaines.

Prix de catalogue hors TVA 19%
Prix éventuellement différents dans les magasins spécialisés.

No. 51860360

Interface Art-Net et USB pour le contrôle des pixels des bandes LED et ruban LED

Peut envoyer jusqu'à 6144 canaux DMX
L'appareil est refroidi par refroidissement par convection passive
Made in Germany
Pour des domaines d'application tels que: Clubs/écoles de danse; Agencement de salons et magasin; installation; Restaurants, bars et hôtels
Vous trouverez de plus amples informations sur ce produit dans la rubrique « Téléchargements » de la fiche technique

Données techniques

Mode d'emploi

Téléchargements

Informations du fabricant

Accessoire

L'accessoire est en cours de chargement. Veuillez patienter...

MADRIX NEBULA

MADRIX NEBULA is a versatile LED pixel-tape driver to directly control digital LEDs.

Take advantage of the creative freedom that LED pixel strips promise

MADRIX NEBULA directly connects to a wide range of digital LEDs and supports over 50 ICs, each usually offering several frequencies. With regular additions to this list, you are free to choose the best available solution for your project.

The many options to wire power, data, and integrate the device allow you to face the most challenging installations.

And despite the serial nature of the signal, MADRIX NEBULA makes sure that not a single one of the 1,360 individual RGB pixels lags behind.

The advanced SPI decoder of MADRIX NEBULA receives control data over Ethernet network or USB and is built to provide excellent image quality.

SPI Converter & Direct connection

Directly connect to a wide range of supported LEDs via two 4-pin screw terminals. A signal frequency of up to 24 MHz is available. Supply power over USB or 5 V to 24 V over a 2-pin screw terminal.

Art-Net / Streaming ACN / USB

Network data is directly converted to SPI without the need for an additional interface. Reliably distribute data from any compatible software or hardware controller. In addition, you can connect MADRIX NEBULA to MADRIX 5 over USB.

Designed for DIN rails or walls

The non-conductive enclosure and standardized design for 35 mm top-hat rails make mounting quick, easy, and safe. 2 extra brackets are provided for optional wall mounting. 9 indicators, which can be turned off, quickly show the device status.

Output of 12 universes

Each device drives up to 1,360 RGB pixels while ensuring responsive delivery of high-quality signals to each individual LED. You can choose the output protocol separately for each of the two ports.

Sync Mode & Daisy-Chain Support

MADRIX 5 and MADRIX hardware allow you to fully synchronize Art-Net data for all ports and across devices to get an optimal image on the LEDs without visual interruptions. 2 Ethernet ports allow linearly daisy-chaining several devices together.

Upgradable firmware

The device is ready within seconds after startup. HTP merging is automatically available for two Ethernet sources. Its firmware is upgradable. Access and change specific device settings using the built-in web configuration page.

Supported LEDs

APA101, APA102, APA104, APA106, GS8206, GS8207, GS8208, GW6201, GW6205, LPD1882S, LPD6803, LPD8806, MBI6024, MBI6120, MY9291, P9883, SJ1221, SK6112, SK6805, SK6812, SK6813, SK6822, SK9816, SK9822, SK9826, SM16703, SM16716, TLC5973, TLS3001, TLS3008, TM1804, TM1809, TM1812, TM1814, TM1829, UCS1903, UCS2903, UCS2904, UCS512B3, UCS8904, UCS9812S, VS17822, WS2801, WS2803, WS2811, WS2811S, WS2812, WS2812B, WS2813, WS2815, WS2818, WS2821, WS2822S, WS2822S Addressing

As of July 2022. Additional LED types will be supported with future firmware updates. Multiple frequencies often supported by type.

Connectivity

2x OUT (via pluggable screw terminals)
2x RJ45 Ethernet ports
1x USB port
1x Power (via pluggable screw terminal)

Package Contents

1x MADRIX NEBULA
1x Set of screw terminals (2x 4-pin and 1x 2-pin)
1x USB 2.0 cable (certified)
2x Wall-mount brackets
1x Technical manual / quick start guide

About MADRIX

MADRIX products are proudly designed, engineered, and made in Germany. We are creating high-quality products for you that are easy to use and reliable. Innovative features will bring you the best results.

We feel that our responsibility is more than just creating prime products. We are also responsible of how we create them: We are intentionally choosing eco power for our office. We have deliberately chosen cardboard as the main part of our product packaging, since it is a renewable resource. In this way, we are also actively minimizing our plastics usage to reduce the environmental impact.

Produits similaires

Alternatives en cours de chargement. Veuillez patienter...